Products

HOME > Products > PORE-FLO

PORE-FLO

PORE-FLO

PORE-FLO

PORE-FLO is multifunctional porous material (plate) made by sintering and rolling same dutchwoven wire meshes(12/64mesh). It is a screen with uniform size of pores, so the pressure drop is more uniform. Standard BONMESH material is SUS316 stainless steal, so PORE-FLO has high mechanical strength and heat and corrosion resistance. Applications are powder transfer, drying, flow rectification, air diffusing etc.

CATALOG DOWNLOAD

Construction

Constitution

Advantages

Uniformity:
Due to small variability of pressure drop, supply gas disperses uniformly.
Rectifying Effect:
PORE-FLO controls the wind speed fluctuation.
Emission Efficiency:
Can extremely reduce remaining amount of powder
Mobility:
Can flow powder in lower angle than its angle of repose (can flow also in inverse draft depending on the powder type)

Specification

Standard type is two layers(Type D) or three layers(Type T)

Material

Standard Material is SUS316L Other materials are also available, consult us.

Panel Size

  • 500×1000mm (standard)
  • From these panels, we can manufacture various shape of filter element.
  • Type D: 0.7~1.3mmType T: 1.5~2.0mm

Examples

AIRE-SLIDER
AIRE-SLIDER

BRIDGE BREAKER
BRIDGE BREAKER

BRIDGE BREAKING AND DISCHARGING
BRIDGE BREAKING AND DISCHARGING

BUBBLING
BUBBLING

CHEMIVAL TREATMENT DRYING DISCHARGING
CHEMIVAL TREATMENT DRYING DISCHARGING

AIR ROLL DEWATERING ROLL
AIR ROLL DEWATERING ROLL

AIRSLIDE PNEUMATIC CONVEYOR
AIRSLIDE PNEUMATIC CONVEYOR

ACOUSTIC (SILENCER)
ACOUSTIC (SILENCER)

Cleaning

Reusable by vapor washing, acid pickling, on-stream backwashing, ultrasonic or high pressure jet water cleaning, furnace heat treating etc. This offers longer life of elements.

Cleaning Service

Special Order

Depending on your specific needs, special order item is also available, please consult us.

We make the best designing according to the following criteria.

  1. Purpose (powder transportation, bridge-breaker, chemical processing, and aeration
  2. shape, installation structure
  3. Flow rate of air(or other gas) and pressure drop
  4. Features of powder (type, particle size, form density, bulk density, angle of repose etc.)
  5. Processing amount
  6. Air supply system (blower, compressor, pressure etc.)
  7. Other conditions (temperature, pressure intensity, material etc.)

*Please use clean gas for air supply, such as instrumental air or gas eliminated dirt over 5μm and oil-mist.

Contact Us

Application

powder transfer, drying, flow rectification, air diffusing etc.

We welcome your various needs and requirements
Feel free to contact us!

+81-774-88-6319

Contact Us

Search by purposeopen
Search by useopen

Related item